Loaders Criteria

Lift Truck (forklift) – hoisting machine designed to perform the capture, recovery, transportation and stowage with rules or special devices. Today Loaders used for loading and unloading at large shops, storage areas, cargo terminals and large wholesalers. Produced two types of forklifts: Electric and trucks. Forklifts – a forklift equipped with an internal combustion engine. can operate in severe weather conditions outdoors. Only because of the noxious exhaust fumes and high noise level, diesel and gasoline trucks should not be used in small enclosed spaces and spaces without adequate ventilation.

Electric – a special vehicle batch with powered by a rechargeable battery. Electric suited for work on public and private areas with hard and smooth surface (such as warehouses, railway wagons). How to choose a truck? Choosing, trucks, First of all you should pay attention to his specifications. The most important of these are: capacity, height of lifting, power transmission, the center of gravity of the load, tire type and engine type. In this article we will briefly we present an approach to choosing a loader. 1.Gruzopodemnost Under the capacity of a vehicle means the mass of goods for which designed the vehicle. On-duty trucks are: – Light Duty – 4.1 tons – average – 4-16 tons – Heavy – 16 tons.

Have the greatest capacity diesel forklifts. 2.Vysota lifting height of stacking truck depends on the type of mast installed on it: – The standard two-piece mast forklift equipped with a two-section mast, can lift loads the third tier of shelves. The height of the transaction up to 3m. – Two-piece mast with free Forklift course with a two-section mast with a free course is suitable for working in confined spaces, such as cargo containers or rail cars, height of cargo – up to 5m. – Tri-mast Loader equipped with a three section mast, can lift the load on the height – 7 pm 3.Tip engine produced trucks with internal combustion engines (forklifts), running on diesel, petrol and gas and trucks operating on the electric current (electric Surgut). 4.Moschnost 5.Tsentr Load 6.Tip tires 7. produced trucks with manual and automatic transmission. Automatic Transmission suits for trucks that need to make a lot of maneuvering in tight spaces. Manual transmission is used when the shipper must travel long distances. Of course, the technical characteristics for which should pay attention when buying a forklift is greater than we have listed in the article.